Additional information
Weight | 17.6 oz |
---|---|
Dimensions | 5.4 × 3.8 × 1.9 in |
Features | • Scaling adjustable over a wide range |
The digital panel meter, DPM 48×96 has been designed for industrial automation and laboratory uses which frequently require precise, onsite adjustment of the display range. With versions available for current (A, B), voltage (C, F) sensors, this panel meter is a cost-effective choice for virtually all switchboard instruments.
*Note: Models AC & T no longer available.
Weight | 17.6 oz |
---|---|
Dimensions | 5.4 × 3.8 × 1.9 in |
Features | • Scaling adjustable over a wide range |
Display
Display Range | 1999 |
Decimal Point Position | Selectable by rear jumper position |
Negative Display Indication | "---" |
Digit Height | 14mm, 7 segment digits |
Overload Indication | Last 3 digits blank |
Operating | 0 to +50°C |
Storage | -40 to +80°C |
Bezel Size | 69mm x 48mm DIN 43 718 |
Panel Cut-Out | 92+0.8mm x 43.5+0.6mm |
Connections | Plug-in screw terminal block |
Protection Class | IP 20 to IEC EN 60 529 |
Front | IP 50 (IP 54 on request) |
Climatic Class | Class 2 VDE/DIN3540 |
Safety Class | II to IEC 348/VDE 0411 |
Device Safety | To IEC EN 61 010 |
EMC Immunity | DIN EN 61 000-4-1 to 4 |
EMC Radiated Interference | DIN EN 50 081 class B |
C | F | |
---|---|---|
Measurement Range | 0-75mV 0-150mV | 0-2V 0-20V 0-200V 0-500V |
Accuracy | <0.1% + 1 digit | <0.2% + 1 digit |
Temperature Coefficient | 100PPM/°C, plus | 100PPM/°C, plus |
Zero Point Drift | 100PPM/°C | 100PPM/°C |
Range Adjustment Span< | From 10% to 100% of range | From 10% to 100% of range |
Range Selection By | Input Choice | Input Choice |
A | B | |
---|---|---|
Measurement Range | 0-20mA 0-2mA 0-200mA | 0-20mA 4-20mA |
Accuracy | <0.1% + 1 digit | <0.1% + 1 digit |
Temperature Coefficient | 100PPM/°C, plus | 100PPM/°C, plus |
Zero Point Drift | 100PPM/°C | 100PPM/°C |
Range Adjustment Span | From 10% to 100% of range | From 10% to 100% of range |
Range selection by | Input Choice | Input Choice |
Datasheet |
Please refer to the Datasheet in the Downloads section of this page.