Additional Information
| Features | • The DW is easy-reading with a large display and wider viewing angles |
|---|---|
| Applications | • Telecommunications |
Get digital accuracy with an analog footprint. The DW Series is a cost-effective solution to retrofitting an analog panel cutout with a digital meter. Custom nomenclature available. Easy hook up from the rear with four studs. The MODUTEC DW Series is available as DC and AC Power Monitors and Process Monitors.
Performance Specifications
Display
| Digits | 3½ (±1999), 7 segment reflective LCD |
| Digit Height | 0.5" (12.7mm) |
| Polarity | Automatic (-) displayed |
| Decimal Point | Factory set. Provisions for selection by user optional |
| Overload | Three lower digits blank for readings greater than 1999 counts |
Performance
| Input Resistance | 200mV & 2V ranges >100MΩ 20V & 200V ranges 1MΩ |
| Input Voltage Drop (current meters) | 200mV typical at f.s. |
| Overvoltage (voltmeters) | ±300VDC |
| Accuracy | 0.1% ±2 digits |
| Conversion Rate | 2.5 per second |
| Normal Mode Rejection | 60db typical |
| Common Mode Rejection | ≥86db |
| Common Mode Voltage Range | ±1V maximum |
| Tempco | 100PPM/°C typical |
DC Power Monitors
Downloads
| Datasheet |
How To Order
Please refer to the Datasheet in the Downloads section of this page.
