Product Tag: digital

digital

Showing all 26 results

Show:
AKA Analog MEMS Accelerometer SeriesAKA Analog MEMS Accelerometer Series

DKA Digital MEMS Accelerometer

Highlights:

Jewell Instruments DKA Series Accelerometers are an excellent choice for cost to performance trade off. The DKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.

 

 

DMH Digital MEMS Inclinometer Series

Highlights:

The Jewell Instruments model DMH is a high precision MEMS inclinometer. Units are available with RS-232, RS-422, RS-485 and UART TTL options. All DMH series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

DML Digital MEMS Inclinometer

DML Digital MEMS Inclinometer

Highlights:

The Jewell Instruments model DML is a low cost digital MEMS inclinometer for industrial applications. Units are available with RS-232, RS-485 and UART TTL output options. All DML series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

DMS Digital MEMS Inclinometer

DMS Digital MEMS Inclinometer

Highlights:

The model DMS is a mid-level performance digital MEMS inclinometer for industrial applications. Standard units are available in RS-232, RS-485 and UART TTL interface options. All DMS series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

DXA-100/200 Series Linear Accelerometer

DXA-100/200 Series Linear Accelerometer

Highlights:

The Jewell DXA-100/200 Series single or dual digital accelerometer takes Jewell’s highly accurate analog closed-loop sensor technology to the next level.

CENELEC-CECC-Logo CENELEC-CECC-Logo
ECC eCompass Series Electronic Compass Modules

ECC eCompass Series

Highlights:

The ECC-2D Series is a low-cost 2D digital compass in a small package with low power consumption and high reliability designed for commercial and industrial users.

ECG eCompass Series Electronic Compass Module

ECG eCompass Series

Highlights:

If your compass application involves vibration, acceleration, uneven terrain, or rough seas, the ECG Series, a gyro-stabilized electronic compass, is an uncompromising solution that will outperform rival units that cost more. The ECG provides remarkably accurate heading, pitch, and roll in dynamic conditions. It all starts with a precision 3-axis solid-state magnetometer. Two angular rate gyros independently stabilize pitch and roll. They augment a dual-axis, electrolytic tilt sensor that provides precise tilt measurements in static environments. Two sets of independent filters, one set for pitch and one for roll, combine gyro and electrolytic sensor measurements to provide the best available tilt measurements.

ECL eCompass Series Electronic Compass Module

ECL eCompass Series

Highlights:

The ECL low-power digital compass is designed specifically for commercial, industrial, and military users. The ECL series will be of particular interest to ROV and AUV manufacturers who are concerned with power usage and accurate heading in all types of challenging conditions.  In standby mode, it draws a mere 50 microamps and requires only 15 mA in run mode. It provides accurate heading data in less than a tenth of a second from wake up. An extended range tilt sensor is available that allows for ±60° of pitch and roll.

ECS digital compass sensor

ECS eCompass Series

Highlights:

The ECS digital compass represents the state-of-the-art in magnetic compassing. It combines a precision 3-axis solid-state magnetometer and a rugged 2-axis electrolytic tilt sensor to provide accurate heading and tilt measurements over a wide range of environmental conditions. The firmware and signal processing algorithms have been refined and improved over three prior generations of compasses to deliver the ultimate in performance from the available sensor data.

IRIS-SC Digital Signal Conditioning Card

IRIS-SC Digital Signal Conditioning Card

Highlights:

The IRIS-SC digital signal conditioning card is a powerful control device designed for use with all Jewell miniature tilt sensors. Output is ASCII RS-232 or RS-422(485) serial. Standard firmware includes five user-programmable alarm/trigger thresholds for tilts tilt switch/control applications. When a selected threshold is reached, the circuitry sets the output high
on one of the pins in the H3 control connector. Other firmware features include user-programmable data output rates, sample averaging, autozero (nulling), and baud rate. The IRIS-SC can also log up to 22,000 samples to internal memory for data dump/download on user command.

All IRIS-SC units include calibration when ordered with Jewell miniature tilt sensors (specify calibrated range on order).

JDI-100/200 Digital MEMS Inclinometer Series

JDI-100/200 Digital MEMS Inclinometer Series

Highlights:

The JDI-100/200 series is a digitally temperature compensated inclinometer available in single and dual-axis configurations. The robust and rugged design is great for industrial use, yet includes the low-cost MEMS technology. These units are available with DB9, Pigtail, Deutsch, Double Deutsch, 6-Pin Circular (C06), or M12 connectors for maximum versatility.RoHs_logo

 

 

Jewell Digital Panel Meter 48x96

Jewell DPM 48×96

Highlights:

The digital panel meter, DPM 48×96 has been designed for industrial automation and laboratory uses which frequently require precise, onsite adjustment of the display range. With versions available for current (A, B), voltage (C, F) sensors, this panel meter is a cost-effective choice for virtually all switchboard instruments.

*Note: Models AC & T no longer available.

 

Jewell DPM 72x144 4½ digit panel meter

Jewell DPM 72 x 144

Highlights:

The Jewell DPM 72×144 4½ digit panel meters have been designed for industrial applications which frequently require precise and on-site adjustment of the display range. They are available in DC or AC current or voltage ranges. For use in industrial automation and for laboratory uses.

Jewell DPM 96 A/V DC

Jewell DPM 96 A/V DC

Highlights:

The digital panel meter, DPM 48×96 has been designed for industrial automation and laboratory uses which frequently require precise, onsite adjustment of the display range. With versions available for current (A, B), voltage (C, F) sensors, this panel meter is a cost-effective choice for virtually all switchboard instruments.

*Note: Models AC & T no longer available.

 

Jewell DPM EINE

Jewell DPM EINE

Highlights:

The digital panel meter has been designed for industrial applications, which frequently require precise, onsite adjustment of the display range. It can be used in industrial automation and for laboratory uses. DPM EINE measures important electrical parameters in 3 phase 4 wire, 3 phase 3 wire, and single phase network replaces the multiple analog panel meters.

Model 701 Platform Tiltmeter Series

Highlights:

The Model 701-2 Platform mount tiltmeter is our most popular design for high precision tilt measurements. Units come with built-in invar leveling legs, for easy installation on any horizontal surface. The A701-2 also includes two switchable gains and two low-pass filter settings. Using an absolute gravity-referenced electrolytic sensor, the A701 delivers ultra-high sensitivity to <0.1 µrad with virtually zero long-term drift. The output is a stable ±8 DC voltage (±16 VDC differential). The D701 digital version has onboard memory, with a storage capacity of up to 22,000 samples.

 

 

Model 711-2 & A716-2

Highlights:

The models A711-2 (floor-mount), and A716-2 (wall-mount) bolt or clamp to any surface, and are well suited for areas with heavy traffic or vibration. Electronic performance is identical to the model A701-2. Floor-mount models are available with a weatherproof NEMA 4X seal (A711-2 4X), or with an RS-232, RS-422, or RS-485 digital output (D711). D711 units also include onboard memory with a storage capacity of up to 22,000 samples. Units include two switchable gains and two low-pass filter settings and are sensitive to <0.1 µrad. Applications include volcano monitoring, high-precision geotechnical engineering, bridge deflection monitoring, precision metrology, radar platform leveling, and high-accuracy tilt monitoring applications where bolt-on installations are required.

Model 801 “Tuff Tilt” Tiltmeter SeriesModel C904 Clinometer Pak 420

Model 801 “Tuff Tilt” Tiltmeter Series

Highlights:

The Model 801 “Tuff Tilt” Tiltmeter series combines high precision and durability in an economical instrument package. Using an absolute gravity referenced electrolytic sensor, the 801 series delivers superior measurement accuracy with virtually no long-term drift. Units are available in a variety of configurations including single axis (uniaxial), or dual axis (biaxial), analog, digital, or 4-20mA outputs.

All units are rated IP65 waterproof for advanced protection from the elements.

 

 

Model 802 Deep Water Submersible Tiltmeter Series

Highlights:

The Model 802 DeepWater Series is the fully submersible cousin of our Model 801 Tuff Tilt Series. Performance features are the same, but the DeepWater housing is machined from a solid piece of 316 stainless steel and incorporates a high-pressure neoprene connector. The pressure rating is 250 bars (2500 meters depth). Higher-pressure versions may be special ordered. Temperature rating is governed by the neoprene connector. Wider temperature range is available with other connector types. Units are available in a variety of configurations including single axis (uniaxial), or dual-axis (biaxial), analog, digital, or 4-20mA outputs.

 

Model 820 Shallow Water Tiltmeter Series

Highlights:

The model 820 Shallow Water is a high-precision submersible tiltmeter for use in fresh and saltwater applications. Using an absolute gravity-referenced electrolytic sensor, the 820 delivers superior measurement accuracy with virtually no long-term drift. High-gain units are sensitive to <0.0017 mm/m or better. Output options include analog (±5 VDC, ±10 VDC), current (4-20mA), and digital (RS-232 and RS-422). All units are rated to 200 meters (656.2 ft) waterproof for advanced protection from the elements. Use the 820 “Shallow Water” for structural monitoring, angle measurement and control, platform leveling, and more.

 

 

Model MD900-T Digital Clinometer

Model MD900-T Digital Clinometer

Highlights:

The biaxial model MD900-T is an economical digital clinometer with powerful firmware features. User programmable settings include AUTO-zero (tare), baud and output rate, sample averaging, and more. Output is RS-232 or RS-422 (RS-485 full-duplex). The MD900-T easily integrates with a variety of GPS receivers and supports Trimble TCM, NMEA XDR, BAE, and Ashtech output protocols. Units ship standard with 6-ft. hook-up cable and a 100-240VAC power transformer. Use the MD900T for industrial pitch and roll measurement, marine piling, dredging and construction systems, platform leveling, geotechnical monitoring, and more.

Model MD908 ‘IRIS’ Tilt Switch

Model MD908 ‘IRIS’ Tilt Switch

Highlights:

The IRIS Tilt Switch and Controller is a powerful tilt controller device that combines a digital, dual-axis clinometer and advanced firmware features in one compact unit. This remarkable instrument enables you to measure and respond to rotational movements in any direction concerning the unchanging gravity vector. Units ship standard with a 24-inch hook-up cable. IRIS is an ideal choice for OEM applications, where it can be used to maintain platform levelness, avoid tip-over conditions, prevent out-of-range movement, and perform other control functions.

 

Modutec 1000 Series Digital Panel Meters

Modutec 1000 Series Digital Panel Meters

Highlights:

The Modutec 1000 takes the guesswork out of reading a small, low-cost, digital panel meter. These meters have an over-range indication of the rated value and auto-zero when there is no input signal. They also feature auto polarity which visually clues the user to a negative reading.

The Modutec 1000 features a 0.3-inch digit display in red or green for hard-to-read applications. Choose from bezel or window mount snap-on bezel – neither of which need extra hardware or panel holes. At 1.34″ x 0.75″ and panel depth less than 0.8″ these meters are easy to read, small units that fit into almost any application.

 

Modutec 2000 Series Digital Panel Meters

Modutec 2000 Series Digital Panel Meters

Highlights:

You need flexibility. We provide it. We customize our meters to meet your specifications.

MODUTEC BL Digital panel meter

Modutec BL Series

Highlights:

The MODUTEC BL Digital panel meter gives you all the functionality you need with none of the extras you don’t need. That means simplicity, easy readability, a small footprint, and a low cost.

 

 

Modutec DW Series Digital Panel Meters

Modutec DW Series Digital Panel Meters

Highlights:

Get digital accuracy with an analog footprint. The DW Series is a cost-effective solution to retrofitting an analog panel cutout with a digital meter. Custom nomenclature available. Easy hook up from the rear with four studs. The MODUTEC DW Series is available as DC and AC Power Monitors and Process Monitors.

Scroll To Top
Close
Close
Shop
Filters
Close

My Cart

Shopping cart is empty!

Continue Shopping