Product Tag: rugged

rugged

Showing all 16 results

Show:
A&M 2.5 Square Ruggedized Series

A&M 2.5 Square Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. Available size 2.5″.

A&M 4951 Switchboard Ruggedized Series

A&M 4951 Switchboard Ruggedized Series

Highlights:

The A&M Model 4951 power factor meters are designed to meet the requirements of MIL-M-19261 and MIL-M-16034. They are supplied as either self-contained or as a “matched-set” with the external transducer. In the external transducer configuration, the transducer is matched to the meter. Both configurations are sealed watertight.

A&M MR Panel Meter Ruggedized Series

A&M MR Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. MR34 Long-scale panel meters are ideal for military and commercial applications. Available 1.5″ (MR13), 2.5″ (MR26) and 3.5″ (MR34 & MR35)sizes.

ASMP Angular Accelerometer

ASMP Angular Accelerometer

Highlights:

The Jewell ASMP Angular Accelerometer is configured specifically to yield a combination of miniaturization, high accuracy and ruggedness. The ASMP has been designed to minimize thermal errors associated with outdoor applications. The Jewell ASMP Series is the highest accuracy sensor of its class in the world today.

 

 

ECS digital compass sensor

ECS eCompass Series

Highlights:

The ECS digital compass represents the state-of-the-art in magnetic compassing. It combines a precision 3-axis solid-state magnetometer and a rugged 2-axis electrolytic tilt sensor to provide accurate heading and tilt measurements over a wide range of environmental conditions. The firmware and signal processing algorithms have been refined and improved over three prior generations of compasses to deliver the ultimate in performance from the available sensor data.

Place holder

Emico Series 802

Highlights:

Series 802 are very small, low-cost, uncalibrated devices for indicating on-off conditions or voltage transition points. They are rugged, dependable, and require less than 2mW to move the flag or pointer. The two types are:

Flag Type (802F)  – A white flag moves from one end of the red & white scale to the other when a predetermined voltage value is exceeded. Provides on-off indication.

Pointer Type (802P) – A pointer moves across the scale to indicate circuit condition. The pointer may be factory set for left, right, or exact center position to indicate zero current. The center point can be specified for a given voltage (±5%) within the range of the device.

Either type can be made to operate with a Zener diode to indicate voltage changes as low as 1 volt.

Jewell surface mounted MS Series analog panel meter

Jewell MS Series

Highlights:

The Jewell surface mounted MS Series analog panel meter is designed with a contemporary concave cover to reduce glare and improve readability. Rugged and durable, this aesthetically pleasing rectangular shape interfaces with today’s high technology applications.

Available in sizes 1.5″ up to 3.5″.

LCF-196 Dual-Axis Analog Inclinometer

LCF-196 Dual-Axis Analog Inclinometer

Highlights:

The Jewell LCF 2000 Series dual axis inclinometer is a rugged, high accuracy version of the LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA.

 

 

LCF-2000 Dual-Axis Analog Inclinometer

LCF-2000 Dual-Axis Analog Inclinometer

Highlights:

The Jewell LCF 2000 Series dual axis inclinometer is a rugged, high accuracy version of the LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA.

 

 

LCF-3000 Tri-Axis Analog Inclinometer

LCF-3000 Tri-Axis Analog Inclinometer

Highlights:

The Jewell LCF 3000 Series tri-axis inclinometer is a rugged, high accuracy version of the LCF Series. It is available with a wide range of options including single ended input power, internal temperature sensor and 4-20mA.

 

 

LSRP Single-Axis Analog Inclinometer

LSRP Single-Axis Analog Inclinometer

Highlights:

The Jewell LSRP Series inclinometer is an extremely sensitive, rugged transducer designed to provide horizontal angle or vertical deviation measurements with virtually infinite resolution. These fluid-damped compact, cylindrical-shaped sensors are stackable to meet the needs of applications with space constraints while facilitating the use of several inclinometers for multi-axis measurements.

RoHs_logo

 

 

 

 

Model 750-100 Tiltmeter Series

Model 750-100 Tiltmeter Series

Highlights:

The 750-100 tiltmeter series is a rugged, high performance, single-axis tilt sensor designed for peak performance in extreme conditions. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as excellent output stability.  Units are available with a 6-pin connector or pin-terminals. Available outputs include 0-5V and 4-20mA. Custom input ranges, filters and temperature compensation are also available on request.

 

RoHs_logo

 

 

Model 750-150 Tiltmeter Series

Model 750-150 Tiltmeter Series

Highlights:

The 750-150 tiltmeter is a high-performance, single-axis tilt sensor with the same specifications as the 750-100, but housed in a larger, more ruggedized, with an IP66 enclosure. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as excellent output stability.  Units are available with a 6-pin connector, pin-terminals, or a wired connection option. Available outputs include 0-5V and 4-20mA. Custom input ranges, filters, and temperature compensation are also available on request.

 

RoHs_logo

 

 

Model 750-200 Tiltmeter Series

Model 750-200 Tiltmeter Series

Highlights:

The 750-200 tiltmeter series is a rugged, shock and vibration resistant, dual-axis tilt sensor designed for geotechnical applications. It is available in a small, convenient package and offers the options of 0-5Vdc or 4-20mA output signals.

 

 

Model A601-2A/2B High-precision Platform Tiltmeter

Model A601-2A/2B High-precision Platform Tiltmeter

Highlights:

The model A601-2 Platform mount tiltmeter is designed for high precision tilt measurements. Units come with built-in micrometer leveling legs, for easy installation on any horizontal surface. The A601-2 also includes two switchable gains and two low-pass filter settings. Using an absolute gravity-referenced electrolytic sensor, the A601-2 delivers ultra-high sensitivity to <25 nrad with virtually zero long-term drift. Output is a stable ±8 DC voltage (±16 VDC differential). Rugged, reliable, and extremely accurate, the A601-2 is the preferred choice for volcano monitoring, high-precision geotechnical engineering, bridge deflection monitoring, precision metrology, radar platform leveling, and high-accuracy tilt monitoring applications worldwide.

Model A603 High Precision Platform Mount Tiltmeter

Model A603 High Precision Platform-Mount Tiltmeter

Highlights:

The model A603 platform mount tiltmeter is designed to fill the gap left by the obsoleted 520M.

Units come with the same leveling worm-gear feet that were on the 520M. The A603 also includes two switchable gains and two low-pass filter settings. Using an absolute gravity referenced electrolytic sensor, the A603 delivers ultra-high sensitivity to <2.5 nrad with virtually zero long-term drift. Output is a stable ±8 DC voltage (±16 VDC differential). Rugged, reliable, and extremely accurate, the A603 is the preferred choice for volcano monitoring, high-precision geotechnical engineering, precision metrology, radar platform leveling, and high-accuracy tilt monitoring applications worldwide.

 

 

Scroll To Top
Close
Close
Shop
Filters
Close

My Cart

Shopping cart is empty!

Continue Shopping