Additional Information
Dimensions | 1.63 × 3.63 × 1.85 in |
---|---|
Features | • Digital output |
Applications | • Radar/Antenna Control |
Market |
The Jewell DXI-100/200 Series single or dual digital inclinometer takes Jewell’s highly accurate analog closed-loop sensor technology to the next level. The DXI-100/200 is available with either RS-422 or RS-485 (Standard) digital interfaces. With a variety of options, including metric mounting threads, a flanged base, and CENELEC/AREMA certified, this product is easily customized to suit your specific application.
Dimensions | 1.63 × 3.63 × 1.85 in |
---|---|
Features | • Digital output |
Applications | • Radar/Antenna Control |
Market |
Static/Dynamic
Input Range (°) | ±1.0 | ±3.0 | ±14.5 | ±30.0 | ±60.0 |
Non Linearity (%FRO max2 | 0.06 | 0.025 | 0.02 | 0.02 | 0.03 |
Scale Factor Tolerance (% maximum) | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
Scale Factor Temperature Sensitivity (PPM/°C maximum) | 100 | 100 | 100 | 100 | 100 |
Output at 0° Tilt (° max) | ±0.01 | ±0.01 | ±0.05 | ±0.05 | ±0.05 |
0° Output Temperature Sensitivity (°/°C, maximum) | 0.005 | 0.005 | 0.005 | 0.005 | 0.005 |
Bandwidth (-3dB, Hz, nominal)3 | 3 | 6 | 30 | 30 | 30 |
Transverse Axis Misalignment (° maximum) | 0.15 | 0.05 | 0.5 | 0.5 | 0.5 |
Resolution & Threshold (µ) | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
Power on Repeatability (° maximum) | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
Repeatability (° maximum) | 0.001 | 0.001 | 0.002 | 0.002 | 0.003 |
Electrical
Number of Axes | 1 or 2 |
Supply Voltage Range (VDC) | 10 to 30 |
Noise (g rms, maximum) | 0.005 |
Input Current (mA, maximum) | 100 |
Environmental
Operating Temperature Range | -40°C to +85°C |
Storage Temperature Range | -40°C to +85°C |
Vibration (grms) | 20 |
Shock | 1500g, 1 msec, ½ sine |
Enclosure
Housing Material | Anodized & Alodine Aluminum |
Protection Class (per IEC 529) | IP67 |
NEMA Enclosure Rating | 6 |
Seal | MIL-STD-202, Method 112 |
Connector Type | MS27476Y10D35P |
Recommended Mating Connector | MS27473T10B35S |
Digital Output
Interface | Ethernet 10Base-T or 100Base-TX (Auto-sensing) |
Protocol | TCP/IP, UPD/IP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, AutoIP, and HTTP |
Output Rep | Degrees |
Notes:
2: Non-linearity is specified as the deviation of output referenced to a best fit straight line, independent of misalignment.
3: In default condition without averaging enabled
4: Default Baud Rate is 38400