Additional Information
| Weight | 0.5 oz |
|---|---|
| Dimensions | 4.05 × 0.92 × 0.51 in |
The Tulip-SC is a precision 4-20mA signal conditioning card for use with all Jewell Instruments miniature tilt sensors. Each TulipSC card operates one single-axis tilt sensor. Tilt output is measured as a 4-20mA output. The Tulip-SC is current loop-powered, so measurements can be made over long cable lengths using an economical 2-wire pair. Units also come with an onboard thermistor for measuring temperature.
Jewell provides factory calibration for all Tulip-SC electronics when ordered with our 84053 and 84064 Ceramic, or Model 755- and 756– miniature tilt sensors.
Performance Specifications
| Input Channels | 1 Tilt Channel (X or Y) | ||
| Output Signal | 4-20mA, 2-wire current loop | ||
| Gain Settings | Fixed | ||
| Standard Calibration | Sensor Type | Scale Factor | Linear Range |
| 755 Series 756 Series 84053 84064-02 | 0.0625°/mA 0.625°/mA 0.375°/mA 6.25°/mA | ±0.25° ±5.0° ±3.0° ±60.0° |
|
| Output Filter | 0.15 seconds | ||
| Temperature Output | 2500Ω thermistor, onboard (type-B curve) | ||
| Power | (0.02 Ampere x R + 10 VDC) < Vs < 29 VDC | ||
| Environmental | -40° to +85°C Operation and storage 0-90% humidity non-condensing |
||
| Materials | Fiberglass PCB, surface mount components | ||
*Specifications subject to change without notice on account of continued product research and development.
Downloads
| Datasheet |
| Outline Drawing |
