• DC inputs
Triplett Ruggedized Series
HR Thermoplastic front with steel back shields this meter from magnetic fields. Available size 3. 5″.
Modutec E-Series 2″ Edgewise Panel Meters
Compact edgewise meter only ½” thick. Self-shielding allows users to stack without magnetic interaction. Lightwell provided for backlighting. Available size 2″.
Emico Series 802
Series 802 are very small, low-cost, uncalibrated devices for indicating on-off conditions or voltage transition points. They are rugged, dependable, and require less than 2mW to move the flag or pointer. The two types are:
Flag Type (802F) – A white flag moves from one end of the red & white scale to the other when a predetermined voltage value is exceeded. Provides on-off indication.
Pointer Type (802P) – A pointer moves across the scale to indicate circuit condition. The pointer may be factory set for left, right, or exact center position to indicate zero current. The center point can be specified for a given voltage (±5%) within the range of the device.
Either type can be made to operate with a Zener diode to indicate voltage changes as low as 1 volt.
Jewell 80 Series
The Jewell window mount 80 series analog panel meter is designed with a crisp appearance and high visibility. Only the clean lines of the dial face appear on your panel front, providing maximum layout flexibility. This unique space-saving meter saves up to 3 cubic inches behind the panel when compared to “barrel type” meters.
Modutec S-Series Surface Mount Panel Meters
The S Series Surface Mount Panel Meters are clean-cut meters with straightforward design and pleasing aspect ratio are leaders of the Modutec line and add distinction to any instrument or control panel. Available in five sizes and a wide variety of types and ranges, they resolve many problems for the equipment designer and are always a solid choice for function and appearance.
AC Meters in this series are available in both moving coil (rectifier type) and iron vane versions. The latter has the virtue of being relatively insensitive to input distortion, while the rectifier type is less affected by frequency variations.
Jewell DGL Series – AC Ammeters/Voltmeters
The moving coil, rectifier panel meters DGL 48/72/96/144 are housed in polycarbonate cases and are suitable for the measurement of AC currents and voltages. Moving coil rectifier instruments measure average values and are calibrated to indicate RMS values, assuming a sinusoidal waveform for frequencies from 40 to 10000 Hz (AC current – 40 to 1000 Hz and AC Voltage – 40 to 10000 Hz). These instruments offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cutout (mosaic mounting). The front glass, bezel, and dial can be easily replaced.
A&M 2.5 Square Ruggedized Series
Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. Available size 2.5″.
Jewell VISTA Series
The Jewell VISTA range of analog panel meters offers accurate measurement and indication of most electrical and electronic parameters in the industry as per industrial standard case size. The range offers AC and DC ammeters, voltmeters, and frequency meters utilizing a high torque pivot and jewel
movement. AC moving iron meters also provided 1.5% high accuracy true RMS measurement.
Modutec 2% Panel Meters 2810/CLE8 Series
Features unique case design, enclosed meter movement with the scales located behind an internal housing for greater dust resistance. Scales can be replaced without chance of damage to the movement. Available in sizes 3.5″ and 4.5″.
Jewell MM Series
The Jewell surface mounted MM series analog panel meter has the popular medallion shape that revolutionized the meter industry. This space-saving design offers high visibility and rugged durability while blending with today’s high technology applications.
Jewell DS Series – Moving Coil
The moving coil panel meters DS 48/72/96/144 are housed in cases made of molded polycarbonate and are suitable for the measurement of DC current and voltages. These instruments offer several advantages in switchboards and Generating Set panels. A number of meters can be mounted in a Panel Cut out (Mosaic mounting). The front glass, bezel, and dial can all easily be replaced.
Modutec W-Series Windo-mount™ Panel Meters
Windo-mount™ is a sophisticated design that has been found universal acceptance since being introduced many years ago by Modutec. The W series meters are easily installed per applications bulletin AB6-1; when so installed the meter cover is flush with the panel surface, with the dial easily read.
W series meters are available in the same ranges and at the same prices as the S series meters. They offer an excellent functional appearance, plus the looks enhancing edge options available. These meters are very popular for stereo and broadcast equipment.
Jewell 70 Series
The highly versatile Jewell surface and bezel-mounted 70 series analog panel meter provide maximum flexibility for selecting the size, type of mechanism, and method of mounting. The crystal clear cover is distortion-free and unaffected by aging. The clean, clear appearance of these meters blends with any color scheme.