Dimensions | 1.50 × 2.187 × .828 in |
---|---|
Available Inputs | • Available with DC inputs |


Emico Series 12
Edgewise compact indicator is frequently used to indicate go/no-go circuit condition or as a miniature null type zero-center tuning indicator to indicate balance in position. 5% Accuracy meters incorporate a moving magnet mechanism. Available size 1.375″.
Downloads
Outline Drawing |
Related Products
Jewell DG Series – Moving Coil & Rectifier 90° Scale
The moving coil, rectifier meters, DG 48/72/96/144 are housed in molded polycarbonate cases and are suitable for the measurement of AC currents and voltages. Moving coil rectifier instruments measure average values and are calibrated to indicate RMS values, assuming a sinusoidal waveform for frequencies from 40 to 10000 Hz (AC current for frequency range of 40 to 1000 Hz and AC voltage for frequency range of 40 to 1000 Hz. These instruments offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cut-out (mosaic mounting). Front glass, bezel & dial can easily be replaced
Jewell FML Series – Frequency Meters
The pointer type frequency meters, FML 96 and FML 144 housed in molded polycarbonate cases are used for the measurement of frequencies in the range of 45 to 450 Hz. For maximum accuracy, the essential measuring range is obtained by suppressing the unwanted frequency span. These instruments offer several advantages in switchboards and panel cut out. A number of meters can be mounted in a panel cut-out (mosaic mounting). The front glass, bezel, and dial can be easily replaced.
Jewell 50 Series
The Jewell surface mounted 50 series analog panel meter is designed with traditional black case and glass windows. Black phenolic Bakelite covers and cases suited for industrial equipment. Available in both round and square shapes.
Jewell DGL Series – AC Ammeters/Voltmeters
The moving coil, rectifier panel meters DGL 48/72/96/144 are housed in polycarbonate cases and are suitable for the measurement of AC currents and voltages. Moving coil rectifier instruments measure average values and are calibrated to indicate RMS values, assuming a sinusoidal waveform for frequencies from 40 to 10000 Hz (AC current – 40 to 1000 Hz and AC Voltage – 40 to 10000 Hz). These instruments offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cutout (mosaic mounting). The front glass, bezel, and dial can be easily replaced.
Jewell 70 Series
The highly versatile Jewell surface and bezel-mounted 70 series analog panel meter provide maximum flexibility for selecting the size, type of mechanism, and method of mounting. The crystal clear cover is distortion-free and unaffected by aging. The clean, clear appearance of these meters blends with any color scheme.
Modutec MC1 Series – 250° High Torque Taut-Band Movements Meters
Modutec MC1 movements are technically advanced and offer outstanding features not found in other 250° movements. Their unusually small size and their refined taut-band suspension mean high performance in the area of accuracy, tracking, and repeatability. Their unique design includes shock limiters and vibration stops which combined with optional Fluidyne®
viscous damping gives them exceptional durability and stability in difficult environments.
Mounting is usually by means of three tapped brass standoffs which are swaged to either the front or the back of the movement, as ordered, permitting installation within its 1.25″ O.D.
Dials can be mounted to standoffs on the front of the movement; however, MC1 movements are usually ordered with a universal mounting plate (see drawing) installed. This not only serves as a dial mount but also coordinates with the mounting requirements of many domestic and imported movements. Note that front standoffs are not available when the universal mounting plate is installed.
Standard movements come without front and back dust caps. Either or both will be installed when specified on order.
Jewell FM Series – Frequency Meter
The pointer type frequency meters, FM 48/72/96/144 are housed in molded polycarbonate cases are suitable for the measurement of frequencies in the range of 45 to 450 Hz. For maximum accuracy, the essential measuring range is obtained by suppressing the unwanted frequency span. These instruments offer several advantages in switchboard and generating set panels. A number of meters can be mounted in a panel cut out (mosaic mounting). The front glass, bezel, and dial can be easily replaced.
Triplett Edgewise Series
.5E Thermoplastic front and steel back. Horizontal mounting. Available size less than .5″.
Jewell DS Series – Moving Coil
The moving coil panel meters DS 48/72/96/144 are housed in cases made of molded polycarbonate and are suitable for the measurement of DC current and voltages. These instruments offer several advantages in switchboards and Generating Set panels. A number of meters can be mounted in a Panel Cut out (Mosaic mounting). The front glass, bezel, and dial can all easily be replaced.
Modutec W-Series Windo-mountâ„¢ Panel Meters
Windo-mountâ„¢ is a sophisticated design that has been found universal acceptance since being introduced many years ago by Modutec. The W series meters are easily installed per applications bulletin AB6-1; when so installed the meter cover is flush with the panel surface, with the dial easily read.
W series meters are available in the same ranges and at the same prices as the S series meters. They offer an excellent functional appearance, plus the looks enhancing edge options available. These meters are very popular for stereo and broadcast equipment.
Emico Series 802
Series 802 are very small, low-cost, uncalibrated devices for indicating on-off conditions or voltage transition points. They are rugged, dependable, and require less than 2mW to move the flag or pointer. The two types are:
Flag Type (802F)Â – A white flag moves from one end of the red & white scale to the other when a predetermined voltage value is exceeded. Provides on-off indication.
Pointer Type (802P) – A pointer moves across the scale to indicate circuit condition. The pointer may be factory set for left, right, or exact center position to indicate zero current. The center point can be specified for a given voltage (±5%) within the range of the device.
Either type can be made to operate with a Zener diode to indicate voltage changes as low as 1 volt.
Triplett Ruggedized Series
HR Thermoplastic front with steel back shields this meter from magnetic fields. Available size 3. 5″.