|Dimensions||4.05 × .92 in|
• Single-ended voltage output
Model 84828 Slimline Signal Conditioning Card
The Model 84828 Slimline Signal Conditioning Card is a compact, analog signal conditioner for use with all Jewell Instruments miniature tilt sensors. Each 84828 card operates one 5-pin biaxial tilt sensor or one uniaxial sensor, plus one LM-35 temperature sensor, which may be installed on the circuit board. Model 84828 has one fixed gain and one RC low-pass filter, both of which can be factory-tuned to meet your requirements. This versatile and inexpensive signal conditioner has single-ended voltage output. Tilt output is measured as a ±4 VDC signal (calibrated range is ±2.5VDC). Units are also available with 0-5VDC output. The slim, low-profile design facilitates use in custom instrument packages, robotics, ROV pitch/roll control, and more.
Jewell provides factory calibration for all 84828 signal conditioning electronics when ordered with our 84053 and 84064 Ceramic, or Model 755- and 756- miniature tilt sensors.
|Input Channels||1 Tilt Channel (X or Y)|
|Output Signal||±4 VDC (standard calibration over ±2.5 VDC)|
|Standard Calibration||Sensor Type||Scale Factor||Range|
|Output Filter (seconds)||0.15|
|Temperature Output||Standard Version: 0.1°C/mV, 0°C = 0 mV
0-5V Output Version: 0°C = 2.5 V
|Power||Standard Version: +8 to +24 VDC
0-5V Output Version: +10.5 to +26.5 VDC
7 mA, 250 mV ripple max., reverse polarity protected
|Environmental||-25 to +70°C operation and storage, 0-80% humidity non-condensing|
|Materials||Fiberglass PCB, surface mount components|
*Specifications subject to change without notice on account of continued product research and development.