Model 802 Deep Water Submersible Tiltmeter Series

Highlights:

The Model 802 DeepWater Series is the fully submersible cousin of our Model 801 Tuff Tilt Series. Performance features are the same, but the DeepWater housing is machined from a solid piece of 316 stainless steel and incorporates a high-pressure neoprene connector. The pressure rating is 250 bars (2500 meters depth). Higher-pressure versions may be special ordered. Temperature rating is governed by the neoprene connector. Wider temperature range is available with other connector types. Units are available in a variety of configurations including single axis (uniaxial), or dual-axis (biaxial), analog, digital, or 4-20mA outputs.

 

Compare
Additional information
Weight 176 oz
Dimensions 4.7 × 3.14 × 2.4 in
Applications

• Structural Monitoring
• Platform Leveling
• Industrial Measurement & Control

A802: ±5V

A802: ±5V

Performance Specifications

High GainStandardWide Angle
Angular Range (°)±0.5±3.0±50
Resolution (°)<0.00010.00060.01
Repeatability (°)<0.00020.0010.02
Non-linearity (%)1<2½ span: 1
Full span: 2
Scale Factor (°/V)0.10.610
Time Constant1.75 sec (2-pole Butterworth low-pass filter)0.15 sec
Kz Temperature Coefficient (°/C)±0.0002
Ks Temperature Coefficient (%/°C)<0.02
Output±5VDC (single ended)
±10VDC (differential)
ChannelsTilt, Temperature
Output Impedance (Ω)270
Temperature Output0.1°C/mV typical
(single ended; 0°C = 0mV)
Power8-18 VDC @ 8mA, 250 mV ripple max, reverse polarity protected
Environmental-4 to +60° C operation
-30 to +100° C storage.
IP68
Materials316SS
(6AL-4V Titanium also available)
Cable6-conductors, two-types available:
1) Neoprene, 20 AWG, no shield
2) PVC jacketed, polypropylene-insulation, 24 AWG, shielded.
Order cable separately.

C802: 4-20mA

C802: 4-20mA

Performance Specifications

High GainStandardWide Angle
Angular Range (°)±0.5±3.0±50
Resolution (°)<0.00010.00060.01
Repeatability (°)<0.00020.0010.02
Non-linearity (%)12½ span: 1
Full span: 2
Scale Factor (°/mA)0.6250.3756.25
Time Constant0.15 sec
Kz Temperature Coefficient (°/C)±0.0002±0.002
Ks Temperature Coefficient (%/°C)<0.04<0.1
Output4-20mA Two-wire current loop (per axis)
ChannelsTilt, Temperature
Output Impedance (Ω)270
Temperature OutputTemperature is measured with a 2500 Ohm thermistor, -50 to 150°C range
Power(0.02 Ampere x R + 10 VDC) < Vs < 29 VDC
Environmental-4 to +60°C operation
-40 to +85°C storage
IP68
Submersible to 200 meters (656.2 ft)
Materials316SS
(6AL-4V Titanium also available)
Cable6-conductors, Neoprene, 20 AWG, no shield

D802: Digital

D802: Digital

Performance Specifications

High GainStandardWide Angle
Angular Range (°)±0.5±5.0±50
Resolution (°)<0.00010.0020.02
Repeatability (°)0.00030.0020.02
Non-linearity (%)0.10.10.1
Time Constant0.15 sec
Kz Temperature Coefficient (°/C)±0.001 ±0.01
Baud Rate9600 (default), 19200, 28800, 57600, 115200, 230400
OutputRS-232, RS-485
Output FormatNMEA XDR, Trimble TCM, Ashtec compatible, Simple (default: X, Y, Temp., S/N)
ChannelsX-tilt, Y-tilt, Temperature
Power7-25 VDC @ 27mA, 250 mV peak to peak ripple max, reverse polarity protected
Environmental-4 to +60° C operation;
-30 to +100° C storage.
3500 psi (~250 bars)
Materials316SS
Cable6-pin neoprene, wet-mateable

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping