Modutec 2000 Series Digital Panel Meters
Modutec 2000 Series Digital Panel Meters

Modutec 2000 Series Digital Panel Meters

Highlights:

You need flexibility. We provide it. We customize our meters to meet your specifications.

Compare
Categories: , Tags: , , , , , ,
Additional information
Weight 2 oz
Dimensions .99 × 3.78 × 1.89 in
Features

• Scalable in engineering units
• Custom labels for special readouts
• User Selectable functions, decimal point, offset, span, process voltage or current, DC voltage
• Red or green backlit display
• Splash and hose proof meeting NEMA 4, NEMA 12, and IPC 55 standards
• Resistant to damage with a high impact polycarbonate case
• Wide operating temperature ranging from -4°F to +140°F (-20°C to +60°C)
• 1/8 DIN industry-standard cut-out and 1-inch depth
• Screw terminals
• Over range indication
• Low cost
• The MODUTEC 2100 includes user-friendly dipswitch selection features
Applications

• Telecommunications
• Water Purification
• Sewage Treatment
• Flow
• Process
• Desalinization
• Temperature
• AC & DC Amps
• AC & DC Volts
FCC Compliance

Complies with the class B Limits of FCC rules and regulations, part 15, sub part J for conducted and radiated emissions.
How to Order

Related Products

Model 711-2 & A716-2

Highlights:

The models A711-2 (floor-mount), and A716-2 (wall-mount) bolt or clamp to any surface, and are well suited for areas with heavy traffic or vibration. Electronic performance is identical to the model A701-2. Floor-mount models are available with a weatherproof NEMA 4X seal (A711-2 4X), or with an RS-232, RS-422, or RS-485 digital output (D711). D711 units also include onboard memory with a storage capacity of up to 22,000 samples. Units include two switchable gains and two low-pass filter settings and are sensitive to <0.1 µrad. Applications include volcano monitoring, high-precision geotechnical engineering, bridge deflection monitoring, precision metrology, radar platform leveling, and high-accuracy tilt monitoring applications where bolt-on installations are required.

Compare
IRIS-SC Digital Signal Conditioning Card

IRIS-SC Digital Signal Conditioning Card

Highlights:

The IRIS-SC digital signal conditioning card is a powerful control device designed for use with all Jewell miniature tilt sensors. Output is ASCII RS-232 or RS-422(485) serial. Standard firmware includes five user-programmable alarm/trigger thresholds for tilts tilt switch/control applications. When a selected threshold is reached, the circuitry sets the output high
on one of the pins in the H3 control connector. Other firmware features include user-programmable data output rates, sample averaging, autozero (nulling), and baud rate. The IRIS-SC can also log up to 22,000 samples to internal memory for data dump/download on user command.

All IRIS-SC units include calibration when ordered with Jewell miniature tilt sensors (specify calibrated range on order).

Compare
ECL eCompass Series Electronic Compass Module

ECL eCompass Series

Highlights:

The ECL low-power digital compass is designed specifically for commercial, industrial, and military users. The ECL series will be of particular interest to ROV and AUV manufacturers who are concerned with power usage and accurate heading in all types of challenging conditions.  In standby mode, it draws a mere 50 microamps and requires only 15 mA in run mode. It provides accurate heading data in less than a tenth of a second from wake up. An extended range tilt sensor is available that allows for ±60° of pitch and roll.

Compare
Modutec W-Series Windo-mount™ Panel Meters

Modutec W-Series Windo-mount™ Panel Meters

Highlights:

Windo-mount™ is a sophisticated design that has been found universal acceptance since being introduced many years ago by Modutec. The W series meters are easily installed per applications bulletin AB6-1; when so installed the meter cover is flush with the panel surface, with the dial easily read.

W series meters are available in the same ranges and at the same prices as the S series meters. They offer an excellent functional appearance, plus the looks enhancing edge options available. These meters are very popular for stereo and broadcast equipment.

Compare
Modutec DW Series Digital Panel Meters

Modutec DW Series Digital Panel Meters

Highlights:

Get digital accuracy with an analog footprint. The DW Series is a cost-effective solution to retrofitting an analog panel cutout with a digital meter. Custom nomenclature available. Easy hook up from the rear with four studs. The MODUTEC DW Series is available as DC and AC Power Monitors and Process Monitors.

Compare
DML Digital MEMS Inclinometer

DML Digital MEMS Inclinometer

Highlights:

The Jewell Instruments model DML is a low cost digital MEMS inclinometer for industrial applications. Units are available with RS-232, RS-485 and UART TTL output options. All DML series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

Compare
JDI-100/200 Digital MEMS Inclinometer Series

JDI-100/200 Digital MEMS Inclinometer Series

Highlights:

The JDI-100/200 series is a digitally temperature compensated inclinometer available in single and dual-axis configurations. The robust and rugged design is great for industrial use, yet includes the low-cost MEMS technology. These units are available with DB9, Pigtail, Deutsch, Double Deutsch, 6-Pin Circular (C06), or M12 connectors for maximum versatility.RoHs_logo

 

 

Compare
Modutec PB Series Surface Mount Panel Meters

Modutec PB Series Surface Mount Panel Meters

Highlights:

The PB Series was designed to meet the expressed need of many customers for meters with a hard-hitting, big-dial area “industrial” look.

PB Series meters are available in many sizes, types, and ranges. Mounting stud configuration complies with ANSI standards: the number of studs is as follows: 1½” meters – 2 studs; 2½” & 3½” meters – 3 studs; 4½” meters – 4 studs. Meters in sizes 1½”, 2½”, and 3½” can be supplied in 4- stud versions at no extra cost.

AC meters in this series are offered in both d’Arsonval (rectifier type) and iron-vane versions. The latter has the virtue of greater standard accuracy and relative insensitivity to input distortion, while the rectifier type is less affected by frequency variations.

Compare

Model 701 Platform Tiltmeter Series

Highlights:

The Model 701-2 Platform mount tiltmeter is our most popular design for high precision tilt measurements. Units come with built-in invar leveling legs, for easy installation on any horizontal surface. The A701-2 also includes two switchable gains and two low-pass filter settings. Using an absolute gravity-referenced electrolytic sensor, the A701 delivers ultra-high sensitivity to <0.1 µrad with virtually zero long-term drift. The output is a stable ±8 DC voltage (±16 VDC differential). The D701 digital version has onboard memory, with a storage capacity of up to 22,000 samples.

 

 

Compare
Modutec 1000 Series Digital Panel Meters

Modutec 1000 Series Digital Panel Meters

Highlights:

The Modutec 1000 takes the guesswork out of reading a small, low-cost, digital panel meter. These meters have an over-range indication of the rated value and auto-zero when there is no input signal. They also feature auto polarity which visually clues the user to a negative reading.

The Modutec 1000 features a 0.3-inch digit display in red or green for hard-to-read applications. Choose from bezel or window mount snap-on bezel – neither of which need extra hardware or panel holes. At 1.34″ x 0.75″ and panel depth less than 0.8″ these meters are easy to read, small units that fit into almost any application.

 

Compare
Model MD900-T Digital Clinometer

Model MD900-T Digital Clinometer

Highlights:

The biaxial model MD900-T is an economical digital clinometer with powerful firmware features. User programmable settings include AUTO-zero (tare), baud and output rate, sample averaging, and more. Output is RS-232 or RS-422 (RS-485 full-duplex). The MD900-T easily integrates with a variety of GPS receivers and supports Trimble TCM, NMEA XDR, BAE, and Ashtech output protocols. Units ship standard with 6-ft. hook-up cable and a 100-240VAC power transformer. Use the MD900T for industrial pitch and roll measurement, marine piling, dredging and construction systems, platform leveling, geotechnical monitoring, and more.

Compare
Model MD908 ‘IRIS’ Tilt Switch

Model MD908 ‘IRIS’ Tilt Switch

Highlights:

The IRIS Tilt Switch and Controller is a powerful tilt controller device that combines a digital, dual-axis clinometer and advanced firmware features in one compact unit. This remarkable instrument enables you to measure and respond to rotational movements in any direction concerning the unchanging gravity vector. Units ship standard with a 24-inch hook-up cable. IRIS is an ideal choice for OEM applications, where it can be used to maintain platform levelness, avoid tip-over conditions, prevent out-of-range movement, and perform other control functions.

 

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping