Modutec 1000 Series Digital Panel Meters
Modutec 1000 Series Digital Panel Meters

Modutec 1000 Series Digital Panel Meters

Highlights:

The Modutec 1000 takes the guesswork out of reading a small, low-cost, digital panel meter. These meters have an over-range indication of the rated value and auto-zero when there is no input signal. They also feature auto polarity which visually clues the user to a negative reading.

The Modutec 1000 features a 0.3-inch digit display in red or green for hard-to-read applications. Choose from bezel or window mount snap-on bezel – neither of which need extra hardware or panel holes. At 1.34″ x 0.75″ and panel depth less than 0.8″ these meters are easy to read, small units that fit into almost any application.

 

Compare
Categories: , Tags: , , , , , ,
Additional information
Weight 1 oz
Dimensions .70 × 1.34 × 1.245 in
Features

• DC power options
• Process and DC inputs with offset and span adjustments
• Low power usage allowing battery operation even with backlighting
• Wide operating temperature range -30° to 80°C (optional)
Applications

• DC Amps
• DC Volts
• Telecommunications
• Water Purification
• Sewage Treatment
• Flow
• Process
• Desalinization
How to Order

Related Products

MODUTEC BL Digital panel meter

Modutec BL Series

Highlights:

The MODUTEC BL Digital panel meter gives you all the functionality you need with none of the extras you don’t need. That means simplicity, easy readability, a small footprint, and a low cost.

 

 

Compare
Modutec E-Series 2? Edgewise Panel Meters

Modutec E-Series 2″ Edgewise Panel Meters

Highlights:

Compact edgewise meter only ½” thick. Self-shielding allows users to stack without magnetic interaction. Lightwell provided for backlighting. Available size 2″.

Compare
ECG eCompass Series Electronic Compass Module

ECG eCompass Series

Highlights:

If your compass application involves vibration, acceleration, uneven terrain, or rough seas, the ECG Series, a gyro-stabilized electronic compass, is an uncompromising solution that will outperform rival units that cost more. The ECG provides remarkably accurate heading, pitch, and roll in dynamic conditions. It all starts with a precision 3-axis solid-state magnetometer. Two angular rate gyros independently stabilize pitch and roll. They augment a dual-axis, electrolytic tilt sensor that provides precise tilt measurements in static environments. Two sets of independent filters, one set for pitch and one for roll, combine gyro and electrolytic sensor measurements to provide the best available tilt measurements.

Compare

Model 701 Platform Tiltmeter Series

Highlights:

The Model 701-2 Platform mount tiltmeter is our most popular design for high precision tilt measurements. Units come with built-in invar leveling legs, for easy installation on any horizontal surface. The A701-2 also includes two switchable gains and two low-pass filter settings. Using an absolute gravity-referenced electrolytic sensor, the A701 delivers ultra-high sensitivity to <0.1 µrad with virtually zero long-term drift. The output is a stable ±8 DC voltage (±16 VDC differential). The D701 digital version has onboard memory, with a storage capacity of up to 22,000 samples.

 

 

Compare
ECS digital compass sensor

ECS eCompass Series

Highlights:

The ECS digital compass represents the state-of-the-art in magnetic compassing. It combines a precision 3-axis solid-state magnetometer and a rugged 2-axis electrolytic tilt sensor to provide accurate heading and tilt measurements over a wide range of environmental conditions. The firmware and signal processing algorithms have been refined and improved over three prior generations of compasses to deliver the ultimate in performance from the available sensor data.

Compare

Model 802 Deep Water Submersible Tiltmeter Series

Highlights:

The Model 802 DeepWater Series is the fully submersible cousin of our Model 801 Tuff Tilt Series. Performance features are the same, but the DeepWater housing is machined from a solid piece of 316 stainless steel and incorporates a high-pressure neoprene connector. The pressure rating is 250 bars (2500 meters depth). Higher-pressure versions may be special ordered. Temperature rating is governed by the neoprene connector. Wider temperature range is available with other connector types. Units are available in a variety of configurations including single axis (uniaxial), or dual-axis (biaxial), analog, digital, or 4-20mA outputs.

 

Compare
AKA Analog MEMS Accelerometer SeriesAKA Analog MEMS Accelerometer Series

DKA Digital MEMS Accelerometer

Highlights:

Jewell Instruments DKA Series Accelerometers are an excellent choice for cost to performance trade off. The DKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.

 

 

Compare
ECL eCompass Series Electronic Compass Module

ECL eCompass Series

Highlights:

The ECL low-power digital compass is designed specifically for commercial, industrial, and military users. The ECL series will be of particular interest to ROV and AUV manufacturers who are concerned with power usage and accurate heading in all types of challenging conditions.  In standby mode, it draws a mere 50 microamps and requires only 15 mA in run mode. It provides accurate heading data in less than a tenth of a second from wake up. An extended range tilt sensor is available that allows for ±60° of pitch and roll.

Compare
DMS Digital MEMS Inclinometer

DMS Digital MEMS Inclinometer

Highlights:

The model DMS is a mid-level performance digital MEMS inclinometer for industrial applications. Standard units are available in RS-232, RS-485 and UART TTL interface options. All DMS series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

Compare
Modutec S-Series Surface Mount Panel Meters

Modutec S-Series Surface Mount Panel Meters

Highlights:

The S Series Surface Mount Panel Meters are clean-cut meters with straightforward design and pleasing aspect ratio are leaders of the Modutec line and add distinction to any instrument or control panel. Available in five sizes and a wide variety of types and ranges, they resolve many problems for the equipment designer and are always a solid choice for function and appearance.

AC Meters in this series are available in both moving coil (rectifier type) and iron vane versions. The latter has the virtue of being relatively insensitive to input distortion, while the rectifier type is less affected by frequency variations.

Compare
Modutec W-Series Windo-mount™ Panel Meters

Modutec W-Series Windo-mount™ Panel Meters

Highlights:

Windo-mount™ is a sophisticated design that has been found universal acceptance since being introduced many years ago by Modutec. The W series meters are easily installed per applications bulletin AB6-1; when so installed the meter cover is flush with the panel surface, with the dial easily read.

W series meters are available in the same ranges and at the same prices as the S series meters. They offer an excellent functional appearance, plus the looks enhancing edge options available. These meters are very popular for stereo and broadcast equipment.

Compare
Modutec DW Series Digital Panel Meters

Modutec DW Series Digital Panel Meters

Highlights:

Get digital accuracy with an analog footprint. The DW Series is a cost-effective solution to retrofitting an analog panel cutout with a digital meter. Custom nomenclature available. Easy hook up from the rear with four studs. The MODUTEC DW Series is available as DC and AC Power Monitors and Process Monitors.

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping