|Dimensions||1.875 × 1.828 × .765 in|
• Available with DC and AC Rectified inputs
Emico Series 13
Edgewise meters mount vertically or horizontally with a curved (13) or flat (13F) front. 5% Accuracy meters incorporate a moving magnet mechanism. Available size 2″.
Modutec World Meter Series – Windo-Mount™ Panel Meters
The World Meters incorporate Modutec’s third-generation taut-band/moving-coil movement – unmatched in any competitive production meter, anywhere – with a space-efficient case and dial configuration that takes about 30% less space than conventional panel meters. The result is a rugged and accurate meter with unique and desirable features, at a very economical price.
Modutec MD & ME Series Edgewise Panel Meters
Useful space-saving meters in two sizes, interchangeable with many costly d’Arsonval meters or moving magnet meters from other sources. All sizes feature flush-to-panel covers without the bulge that disfigures many edgewise meters. A low-cost option provides internal illumination through a translucent dial – sophisticated lighting unusual in any economy meter, let alone an edgewise type.
A&M 4951 Switchboard Ruggedized Series
The A&M Model 4951 power factor meters are designed to meet the requirements of MIL-M-19261 and MIL-M-16034. They are supplied as either self-contained or as a “matched-set” with the external transducer. In the external transducer configuration, the transducer is matched to the meter. Both configurations are sealed watertight.
Emico Series 12
Edgewise compact indicator is frequently used to indicate go/no-go circuit condition or as a miniature null type zero-center tuning indicator to indicate balance in position. 5% Accuracy meters incorporate a moving magnet mechanism. Available size 1.375″.
Modutec PB Series Surface Mount Panel Meters
The PB Series was designed to meet the expressed need of many customers for meters with a hard-hitting, big-dial area “industrial” look.
PB Series meters are available in many sizes, types, and ranges. Mounting stud configuration complies with ANSI standards: the number of studs is as follows: 1½” meters – 2 studs; 2½” & 3½” meters – 3 studs; 4½” meters – 4 studs. Meters in sizes 1½”, 2½”, and 3½” can be supplied in 4- stud versions at no extra cost.
AC meters in this series are offered in both d’Arsonval (rectifier type) and iron-vane versions. The latter has the virtue of greater standard accuracy and relative insensitivity to input distortion, while the rectifier type is less affected by frequency variations.
Jewell DG Series – Moving Coil & Rectifier 90° Scale
The moving coil, rectifier meters, DG 48/72/96/144 are housed in molded polycarbonate cases and are suitable for the measurement of AC currents and voltages. Moving coil rectifier instruments measure average values and are calibrated to indicate RMS values, assuming a sinusoidal waveform for frequencies from 40 to 10000 Hz (AC current for frequency range of 40 to 1000 Hz and AC voltage for frequency range of 40 to 1000 Hz. These instruments offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cut-out (mosaic mounting). Front glass, bezel & dial can easily be replaced
Modutec E-Series 2″ Edgewise Panel Meters
Compact edgewise meter only ½” thick. Self-shielding allows users to stack without magnetic interaction. Lightwell provided for backlighting. Available size 2″.
Triplett Ruggedized Series
HR Thermoplastic front with steel back shields this meter from magnetic fields. Available size 3. 5″.
Modutec S-Series Surface Mount Panel Meters
The S Series Surface Mount Panel Meters are clean-cut meters with straightforward design and pleasing aspect ratio are leaders of the Modutec line and add distinction to any instrument or control panel. Available in five sizes and a wide variety of types and ranges, they resolve many problems for the equipment designer and are always a solid choice for function and appearance.
AC Meters in this series are available in both moving coil (rectifier type) and iron vane versions. The latter has the virtue of being relatively insensitive to input distortion, while the rectifier type is less affected by frequency variations.
Jewell DS Series – Moving Coil
The moving coil panel meters DS 48/72/96/144 are housed in cases made of molded polycarbonate and are suitable for the measurement of DC current and voltages. These instruments offer several advantages in switchboards and Generating Set panels. A number of meters can be mounted in a Panel Cut out (Mosaic mounting). The front glass, bezel, and dial can all easily be replaced.
Jewell HS Series
The Jewell surface mounted HS series analog panel meter is renowned for its resistance to shock, vibration, and moisture. Special parts and fastening reduce the effects of hard usage; a one-piece, steel case provides magnetic and electrostatic shielding; and a convex glass window is hermetically sealed.
A&M 2.5 Square Ruggedized Series
Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. Available size 2.5″.