• DC and AC Rectified inputs
A&M 2.5 Square Ruggedized Series
Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. Available size 2.5″.
|Scale Length||Model 233 & 235: 1.8"
Model 236: 1.6"
|Terminals||10/32 Brass Stud (nuts, washers, and solder lugs provided)|
The JMI-100/200 series is a robust and rugged MEMS inclinometer available in single and dual-axis configurations. The low-cost MEMS technology is great for industrial use. These units are available in single-axis or dual-axis, and we also offer three output options: 0-5VDC (S series), 4-20mA (L series), and ±5VDC (D Series).
The model A601-2 Platform mount tiltmeter is designed for high precision tilt measurements. Units come with built-in micrometer leveling legs, for easy installation on any horizontal surface. The A601-2 also includes two switchable gains and two low-pass filter settings. Using an absolute gravity-referenced electrolytic sensor, the A601-2 delivers ultra-high sensitivity to <25 nrad with virtually zero long-term drift. Output is a stable ±8 DC voltage (±16 VDC differential). Rugged, reliable, and extremely accurate, the A601-2 is the preferred choice for volcano monitoring, high-precision geotechnical engineering, bridge deflection monitoring, precision metrology, radar platform leveling, and high-accuracy tilt monitoring applications worldwide.
The Jewell ASMP Angular Accelerometer is configured specifically to yield a combination of miniaturization, high accuracy and ruggedness. The ASMP has been designed to minimize thermal errors associated with outdoor applications. The Jewell ASMP Series is the highest accuracy sensor of its class in the world today.
The Jewell surface mounted MS Series analog panel meter is designed with a contemporary concave cover to reduce glare and improve readability. Rugged and durable, this aesthetically pleasing rectangular shape interfaces with today’s high technology applications.
Available in sizes 1.5″ up to 3.5″.
The model A603 platform mount tiltmeter is designed to fill the gap left by the obsoleted 520M.
Units come with the same leveling worm-gear feet that were on the 520M. The A603 also includes two switchable gains and two low-pass filter settings. Using an absolute gravity referenced electrolytic sensor, the A603 delivers ultra-high sensitivity to <2.5 nrad with virtually zero long-term drift. Output is a stable ±8 DC voltage (±16 VDC differential). Rugged, reliable, and extremely accurate, the A603 is the preferred choice for volcano monitoring, high-precision geotechnical engineering, precision metrology, radar platform leveling, and high-accuracy tilt monitoring applications worldwide.
The model 820 Shallow Water is a high-precision submersible tiltmeter for use in fresh and saltwater applications. Using an absolute gravity-referenced electrolytic sensor, the 820 delivers superior measurement accuracy with virtually no long-term drift. High-gain units are sensitive to <0.0017 mm/m or better. Output options include analog (±5 VDC, ±10 VDC), current (4-20mA), and digital (RS-232 and RS-422). All units are rated to 200 meters (656.2 ft) waterproof for advanced protection from the elements. Use the 820 “Shallow Water” for structural monitoring, angle measurement and control, platform leveling, and more.
The moving coil panel meters, DSL 48/72/96/144 are housed in molded polycarbonate cases are suitable for the measurement of DC currents and voltages. These instruments offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cut out (mosaic mounting). The front glass, bezel, and dial can be easily replaced.
Windo-mount™ is a sophisticated design that has been found universal acceptance since being introduced many years ago by Modutec. The W series meters are easily installed per applications bulletin AB6-1; when so installed the meter cover is flush with the panel surface, with the dial easily read.
W series meters are available in the same ranges and at the same prices as the S series meters. They offer an excellent functional appearance, plus the looks enhancing edge options available. These meters are very popular for stereo and broadcast equipment.
The AMI Series is a single or dual axis, high precision MEMS inclinometer with built-in thermal compensation. Standard units come with 0-5V, 0.5-4.5V or 4-20mA output options. All AMI series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request
The Jewell LCF-196 Series is a high accuracy sensor designed for applications where high levels of shock and vibration are present. The LCF-196 is a two-axis tilt sensor in a 22 mm diameter stainless steel package. Rugged, dual axis, fluid damped tubular style sensor.
The Jewell Instruments model AMS is a mid-level performance analog MEMS inclinometer for industrial applications. Standard units are available with 0-5V, 0.5-4.5V and 4-20mA output options. All AMS series inclinometers are rated IP67 waterproof up to 1m. Custom ranges and output types are also available on request.