DMS Digital MEMS Inclinometer

The model DMS is a mid-level performance digital MEMS inclinometer for industrial applications. Standard units are available in RS-232, RS-485 and UART TTL interface options. All DMS series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request.

Additional Information

Weight 5.3 oz
Dimensions 3.54 × 1.58 × 1.02 in

• Single-Axis and Dual-axis Available
• Resolution: 0.01°
• Zero Temperature Coefficient: ±0.01°/°C
• -40° to +85°C Operation and Storage
• RS232, RS485 & UART TTL Outputs
• 1m cable whip included


• Boom Position and Control
• Radar and Vehicle Platform Positioning
• Industrial Measurement and Control
• Drilling Equipment
• Navigation Pitch/Roll Measurement
• Railway Track Alignment & Maintentance

Performance Specifications


Angular Range (°)*±10±30±60±90
Zero Temperature Coefficient (°/°C)±0.01±0.01±0.01±0.01
Scale Factor Temperature Coefficient (PPM/°C)≤200≤200≤200≤200
Scale Factor Tolerance (%)
Zero Offset Tolerance (°)0.560.560.560.56
Warm Up (sec)
Hysteresis (°)
Time Constant (sec)
Resolution (°)

Electrical & Environmental

Output Rate5Hz, 15Hz, 35Hz, 50Hz
Output TypeRS-232/RS-485/TTL
Electromagnetic CompatibilityEN61000 and GBT17626
Impact Resistance100g@11ms, 3 times/axis (½ sinusoid)
Vibration Resistance10grms @ 10-1000Hz
Operating Temperature Range-40 to +85°C
Storage Temperature Range-55 to +125°C
Cables1m Cable (standard)
Power Requirements9-36 VDC @ 60mA

*Custom ranges available
Specifications subject to change without notice on account of continued product development.


Outline Drawing

Click outside to hide the comparison bar