Tulip SC 4-20mA Signal Conditioning Card

Highlights:

The Tulip-SC is a precision 4-20mA signal conditioning card for use with all Jewell Instruments miniature tilt sensors. Each TulipSC card operates one single-axis tilt sensor. Tilt output is measured as a 4-20mA output. The Tulip-SC is current loop-powered, so measurements can be made over long cable lengths using an economical 2-wire pair. Units also come with an onboard thermistor for measuring temperature.

Jewell provides factory calibration for all Tulip-SC electronics when ordered with our 84053 and 84064 Ceramic, or Model 755- and 756– miniature tilt sensors.

Compare
Additional information
Weight 0.5 oz
Dimensions 4.05 × 0.92 × 0.51 in
Performance Specifications

Performance Specifications

Input Channels1 Tilt Channel (X or Y)
Output Signal4-20mA, 2-wire current loop
Gain SettingsFixed
Standard CalibrationSensor TypeScale FactorLinear Range
755 Series
756 Series
84053
84064-02
0.0625°/mA
0.625°/mA
0.375°/mA
6.25°/mA
±0.25°
±5.0°
±3.0°
±60.0°
Output Filter0.15 seconds
Temperature Output2500Ω thermistor, onboard (type-B curve)
Power(0.02 Ampere x R + 10 VDC) < Vs < 29 VDC
Environmental-40° to +85°C Operation and storage
0-90% humidity non-condensing
MaterialsFiberglass PCB, surface mount components

*Specifications subject to change without notice on account of continued product research and development.

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping