Modutec MAS Series Rectangular Panel Meters
Modutec MAS Series Rectangular Panel Meters

Modutec MAS Series Rectangular Panel Meters

Highlights:

Attractive contemporary designs with the typical Modutec low aspect ratio. All have operating zero adjusters, and scales printed on translucent plastic, permitting beautifully diffused lighting using either the external light kit described in “options” or a custom light source.

Compare
Categories: , Tags: , , ,
Additional information
Features

• Mount flush or surface without modification.
• Precision-molded covers and cases.
• Accuracy 5% of full scale.
• High torque, powerful ballistic movements permit mounting in steel panels without special calibration.
• Beautiful styling with subtle translucent lighting available in rectangular and square models.
• Production-engineered quick mounting and electrical connections.
Performance Specifications

Performance Specifications

Accuracy±5% of full scale (3% available as an option)*
Temperature RangeOperating: 0°C to +50°C
Storage: -20°C to +60°C
° of Arc, Scale Length°ARCScale Length
1MAS901.5"
2MAS902.2"
3MAS902.7"
Downloads

Downloads

Datasheet
Outline Drawing
Catalog
How to Order

Please refer to the MAS Catalog in the Downloads section of this page. Mention any options you would like to add to your meter.

Related Products

Place holder

Modutec 2% Panel Meters 2810/CLE8 Series

Highlights:

Features unique case design, enclosed meter movement with the scales located behind an internal housing for greater dust resistance. Scales can be replaced without chance of damage to the movement. Available in sizes 3.5″ and 4.5″.

Compare
Modutec PB Series Surface Mount Panel Meters

Modutec PB Series Surface Mount Panel Meters

Highlights:

The PB Series was designed to meet the expressed need of many customers for meters with a hard-hitting, big-dial area “industrial” look.

PB Series meters are available in many sizes, types, and ranges. Mounting stud configuration complies with ANSI standards: the number of studs is as follows: 1½” meters – 2 studs; 2½” & 3½” meters – 3 studs; 4½” meters – 4 studs. Meters in sizes 1½”, 2½”, and 3½” can be supplied in 4- stud versions at no extra cost.

AC meters in this series are offered in both d’Arsonval (rectifier type) and iron-vane versions. The latter has the virtue of greater standard accuracy and relative insensitivity to input distortion, while the rectifier type is less affected by frequency variations.

Compare
A&M MR Panel Meter Ruggedized Series

A&M MR Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. MR34 Long-scale panel meters are ideal for military and commercial applications. Available 1.5″ (MR13), 2.5″ (MR26) and 3.5″ (MR34 & MR35)sizes.

Compare
Modutec 0MS & MSQ Series Square Panel Meters

Modutec 0MS & MSQ Series Square Panel Meters

Highlights:

Traditional square meters with the look of the 80s and a low price tag. These have operating zero adjusters and scales printed on translucent plastic, permitting diffused back-lighting using either the external light kit described in “Options” or custom lighting. Installation holes and cutouts are interchangeable with domestic and foreign designs, making product improvement quick and easy.

Compare
Place holder

Modutec MC1 Series – 250° High Torque Taut-Band Movements Meters

Highlights:

Modutec MC1 movements are technically advanced and offer outstanding features not found in other 250° movements. Their unusually small size and their refined taut-band suspension mean high performance in the area of accuracy, tracking, and repeatability. Their unique design includes shock limiters and vibration stops which combined with optional Fluidyne®
viscous damping gives them exceptional durability and stability in difficult environments.

Mounting is usually by means of three tapped brass standoffs which are swaged to either the front or the back of the movement, as ordered, permitting installation within its 1.25″ O.D.

Dials can be mounted to standoffs on the front of the movement; however, MC1 movements are usually ordered with a universal mounting plate (see drawing) installed. This not only serves as a dial mount but also coordinates with the mounting requirements of many domestic and imported movements. Note that front standoffs are not available when the universal mounting plate is installed.

Standard movements come without front and back dust caps. Either or both will be installed when specified on order.

Compare
A&M 2.5 Square Ruggedized Series

A&M 2.5 Square Ruggedized Series

Highlights:

Designed and manufactured in conformance with MIL-PRF-10304 (not QPL listed). Ideal for communication or test equipment where severe environmental conditions are encountered. Available size 2.5″.

Compare
Modutec World Meter Series – Windo-Mount™ Panel Meters

Modutec World Meter Series – Windo-Mount™ Panel Meters

Highlights:

The World Meters incorporate Modutec’s third-generation taut-band/moving-coil movement – unmatched in any competitive production meter, anywhere – with a space-efficient case and dial configuration that takes about 30% less space than conventional panel meters. The result is a rugged and accurate meter with unique and desirable features, at a very economical price.

Compare
Jewell DSL Series – DC Ammeters/Voltmeters

Jewell DSL Series – DC Ammeters/Voltmeters

Highlights:

The moving coil panel meters, DSL 48/72/96/144 are housed in molded polycarbonate cases are suitable for the measurement of DC currents and voltages. These instruments offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cut out (mosaic mounting). The front glass, bezel, and dial can be easily replaced.

Compare
Jewell surface mounted HS series analog panel meter

Jewell HS Series

Highlights:

The Jewell surface mounted HS series analog panel meter is renowned for its resistance to shock, vibration, and moisture. Special parts and fastening reduce the effects of hard usage; a one-piece, steel case provides magnetic and electrostatic shielding; and a convex glass window is hermetically sealed.

Compare
Jewell VISTA range of Analog Panel Meters

Jewell VISTA Series

Highlights:

The Jewell VISTA range of analog panel meters offers accurate measurement and indication of most electrical and electronic parameters in the industry as per industrial standard case size. The range offers AC and DC ammeters, voltmeters, and frequency meters utilizing a high torque pivot and jewel
movement. AC moving iron meters also provided 1.5% high accuracy true RMS measurement.

Compare
Place holder

Emico Series 12

Highlights:

Edgewise compact indicator is frequently used to indicate go/no-go circuit condition or as a miniature null type zero-center tuning indicator to indicate balance in position. 5% Accuracy meters incorporate a moving magnet mechanism. Available size 1.375″.

Compare
Jewell DS Series Moving Coil Panel Meters

Jewell DE Series – Moving Iron

Highlights:

The moving iron panel meters, DE 48/72/96/144 housed in cases made of molded polycarbonate are suitable for the measurement of AC currents for the frequency range of 15 to 400 Hz and voltages in the frequency range of 15 to 100Hz. Moving iron meters indicate RMS values practically independent of waveform even of high harmonics. An error of indication may occur for extreme waveforms (e.g. phase gating controls) & for frequencies above 100KHz.

These meters offer several advantages in switchboards and generating set panels. A number of meters can be mounted in a panel cutout mosaic mounting. For CT-operated ammeters, dials can be fitted based on CT ratio. Glass and bezel can easily be replaced.

Compare

Scroll To Top
Close
Close
Shop
Close

My Cart

Shopping cart is empty!

Continue Shopping