| Weight | 13.8 oz |
|---|---|
| Dimensions | 3.75 × 2.88 × 3.63 in |
| Features | • Digital output |
| Applications | • Radar/Antenna Control |
eDXI-100/200 Single or Dual Axis Digital Inclinometer
Highlights:
Compare
The Jewell eDXI-100/200 Series is a single or dual digital inclinometer with the convenience of Ethernet output. With its power over ethernet capability, no power source is needed. Simply plug it in to your computer.
Additional information
Performance Specifications
Performance Specifications
Static/Dynamic
| Input Range (°) | ±1.0 | ±3.0 | ±14.5 | ±30.0 | ±60.0 |
| Non-linearity (%FRO max)2 | 0.02 | 0.015 | 0.02 | 0.02 | 0.03 |
| Scale Factor Tolerance (% maximum) | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
| Scale Factor Temperature Sensitivity (PPM/°C maximum) | 100 | 100 | 100 | 100 | 100 |
| Output at 0° Tilt (° max) | ±0.01 | ±0.01 | ±0.05 | ±0.05 | ±0.05 |
| 0° Output Temperature Sensitivity (°/°C, maximum) | 0.005 | 0.005 | 0.005 | 0.005 | 0.005 |
| Bandwidth (-3dB, Hz, nominal)3 | 3 | 6 | 30 | 30 | 30 |
| Transverse Axis Misalignment (° maximum) | 0.15 | 0.15 | 0.5 | 0.5 | 0.5 |
| Resolution & Threshold (° maximum) | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| Power on Repeatability (° maximum) | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| Repeatability (° maximum) | 0.001 | 0.001 | 0.002 | 0.002 | 0.003 |
Electrical
| Number of Axes | 1 or 2 |
| Supply Voltage Range (VDC) | 36 to 57 |
| Startup Voltage (VDC, Minimum) | 42 |
| Noise (millidegrees rms, maximum) | 2 |
| Input Current (mA, maximum) | 250 |
| Input to Output Isolation (Vspeak Impulse) | 1500 |
Environmental
| Operating Temperature Range | -40°C to +85°C |
| Storage Temperature Range | -40°C to +85°C |
| Vibration (grms) | 20 |
| Shock | 1500g, 1 msec, ½ sine |
Enclosure
| Housing Material | Anodized & Alodine Aluminum |
| Protection Class (per IEC 529) | IP65 |
| NEMA Enclosure Rating | 6 |
| Seal | MIL-STD-202, Method 112 |
| Connector Type | Amphenol RJF72B00 |
| Recommended Mating Connector | Amphenol RJF6B |
Digital Output
| Interface | Ethernet 10Base-T or 100Base-TX (Auto-sensing) |
| Protocol | TCP/IP, UPD/IP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, AutoIP, and HTTP |
| Output Rep | Degrees |
Notes:
1: Full range is defined as “from negative full input angle to positive full input angle”
2: Non-linearity is specified as deviation of output referenced to a best fit straight line, independent of misalignment.
3: In default condition without averaging enabled
Downloads
Downloads
| Datasheet |
| Outline Drawing |
Related Products
Model 750-150 Tiltmeter Series
Highlights:
The 750-150 tiltmeter is a high-performance, single-axis tilt sensor with the same specifications as the 750-100, but housed in a larger, more ruggedized, with an IP66 enclosure. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as excellent output stability. Units are available with a 6-pin connector, pin-terminals, or a wired connection option. Available outputs include 0-5V and 4-20mA. Custom input ranges, filters, and temperature compensation are also available on request.
JDI-100/200 Digital MEMS Inclinometer Series
Highlights:
The JDI-100/200 series is a digitally temperature compensated inclinometer available in single and dual-axis configurations. The robust and rugged design is great for industrial use, yet includes the low-cost MEMS technology. These units are available with DB9, Pigtail, Deutsch, Double Deutsch, 6-Pin Circular (C06), or M12 connectors for maximum versatility.
LCF-300 Single-Axis Analog Inclinometer
Highlights:
The Jewell LCF-300 Series flexure suspension servo fluid damped inclinometer is a ±1° to ±90° device designed for applications where high levels of shock and vibration are present. LCF-300 units are characterized by excellent turn on repeatability and very low hysteresis. It is available in three different versions (D, L, or S), varying input and output, and with either a 6 pin connector or a pin-terminal option in order to meet your specific needs.
LSRP Single-Axis Analog Inclinometer
Highlights:
The Jewell LSRP Series inclinometer is an extremely sensitive, rugged transducer designed to provide horizontal angle or vertical deviation measurements with virtually infinite resolution. These fluid-damped compact, cylindrical-shaped sensors are stackable to meet the needs of applications with space constraints while facilitating the use of several inclinometers for multi-axis measurements.
JMI-100/200 Analog MEMS Inclinometer Series
Highlights:
The JMI-100/200 series is a robust and rugged MEMS inclinometer available in single and dual-axis configurations. The low-cost MEMS technology is great for industrial use. These units are available in single-axis or dual-axis, and we also offer three output options: 0-5VDC (S series), 4-20mA (L series), and ±5VDC (D Series).
