| Dimensions | 3.75 × 2.88 × 2.96 in |
|---|---|
| Features | • ±0.5g to ± 5.0g Full Range |
| Applications | • Geophysical Testing |
LCF-3500 Series Linear Accelerometer
Highlights:
Compare
The Jewell LCF-3500 Series Flexure Suspension Fluid Damped Tri-Axial Accelerometer is a ±0.5G to ±5G device designed for applications where high levels of shock and vibration are present. LCF units are characterized by excellent turn on repeatability and very low hysteresis.
Additional information
Performance Specifications
Performance Specifications
Static/Dynamic
| Input Range (g)1 | ±0.50 | ±2.0 | ±5.0 |
| Full Range Output (Volts ±0.5%) | ±5 | ±5 | ±5 |
| Non-linearity (%FRO max)2 | 0.05 | 0.05 | 0.05 |
| Scale Factor (Volts/g, nominal) | 10.0 | 2.50 | 1.00 |
| Scale Factor Temperature Sensitivity (PPM/°C maximum) | 100 | 100 | 100 |
| Bias (g maximum) | 0.005 | 0.005 | 0.005 |
| Bias Temperature Sensitivity (µg/° maximum) | 100 | 100 | 100 |
| Natural Frequency (Hz minimum)3 | 30 | 30 | 30 |
| Bandwidth (-3dB, Hz, minimum) | 30 | 30 | 30 |
| Input Axis Misalignment (° maximum) | 1.0 | 1.0 | 1.0 |
| Resolution & Threshold (µ) | 10 | 10 | 10 |
Electrical
| Number of Axes | 3 |
| Input Voltage Range (VDC) | ±12 to ±18 |
| Input Current (mA, maximum) | ±45 |
| Output Impedance (Ω, nominal) | 100 |
| Noise (Vrms, maximum) | 0.002 |
Environmental
| Operating Temperature Range | -40°C to +80°C |
| Storage Temperature Range | -60°C to +90°C |
| Vibration | 20 grms |
| Shock | 1000g, 1 msec, ½ sine |
| Seal | Epoxy |
Custom Capabilities
- Unit Power Connections can be easily adapted for operations from single-ended, floating power supplies of 24 to 36 Volts DC
- Internal Temperature Sensor
- 4-20mA Output
Notes:
1: Full range is defined as “from negative to positive full input acceleration.”
2: Referenced to best-fit straight line independent of misalignments
3: Output phase angle = -90°.
Downloads
Downloads
| Datasheet |
| Outline Drawing |
Related Products
SMA Series Linear Accelerometer
Highlights:
The Jewell SMA Series accelerometer is a low cost, high precision sensor designed with very high accuracy. Applications include robotics, construction equipment, industrial measurement and control, and precision machining. All Emerald Series accelerometers are RoHS compliant.
ECV-IMU Inertial Measurement Unit
Highlights:
Jewell Instruments’ offers ECV-IMU Series initial measurement units which assure high accuracy in a small package. This inertial measurement unit is a cost efficient, low power consuming device which provides stable azimuth, pitch, and roll measurements in dynamic conditions. This sensor consists of 3-axis angular rate gyros, 3-axis accelerometer, 3-axis magnetometer, and optional 2-axis electrolytic tilt sensor. These IMUs have a wide operating range and are factory calibrated. Hence, they offer an accurate and fast output through RS-485.
LCF-300 Single-Axis Analog Inclinometer
Highlights:
The Jewell LCF-300 Series flexure suspension servo fluid damped inclinometer is a ±1° to ±90° device designed for applications where high levels of shock and vibration are present. LCF-300 units are characterized by excellent turn on repeatability and very low hysteresis. It is available in three different versions (D, L, or S), varying input and output, and with either a 6 pin connector or a pin-terminal option in order to meet your specific needs.
JMA-165 Analog MEMS Accelerometer Series
Highlights:
The Jewell Instruments JMA-165 MEMS accelerometers are a cost effective and viable alternative to traditional force balance designs. This mighty little sensor is CENELEC, AREMA certified, and RoHS compliant. With options for heated or non-heated, and available filtering, you can customize the perfect sensor for your application.
|
 |
 |
