The D750-100/200 tiltmeter series is the digital version of the Black Diamond Tiltmeter sensor line for geotechnical measurement. It includes a 0.001° and industry standard RS-485 or RS-422 digital output signals.
BLACK DIAMOND SERIESThe Jewell Black Diamond Series inclinometer is a low cost, high precision tilt sensor designed with higher accuracy than comparable MEMS devices. It is meant for geotechnical monitoring applications including bridge sag and sway, deflection measurement, platform leveling and structural analysis.
| Weight | 8.1 oz |
|---|---|
| Dimensions | 3.235 × 2.03 × 2.1 in |
| Features | • Digital output |
| Applications | • Radar/Antenna Control |
Performance
| Input Range (°) | ±1 | ±3 | ±14.5 | ±30 | ±60 |
| Non-linearity (%FRO maximum)2 | 0.02 | 0.015 | 0.02 | 0.02 | 0.03 |
| Scale Factor Tolerance (%, maximum) | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
| Scale Factor Temperature Sensitivity (% reading/°C maximum) | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 |
| Bandwidth (-3dB, Hz, nominal)3 | 3.0 | 6.0 | 30.0 | 30.0 | 30.0 |
| Transverse Axis Misalignment (° maximum) | 0.15 | 0.15 | 0.5 | 0.5 | 0.5 |
| Output at 0° Tilt (maximum) | 0.01 | 0.01 | 0.05 | 0.05 | 0.05 |
| 0° Output Temperature Sensitivity (°/°C maximum) | 0.001 | 0.001 | 0.005 | 0.005 | 0.005 |
| Hysteresis (° maximum) | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| Resolution & Threshold (° maximum) | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| Power on Repeatability (° maximum) | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| Repeatability (° maximum) | 0.001 | 0.001 | 0.002 | 0.002 | 0.003 |
Digital Output
| Interface | EIA-RS485 |
| Protocol | Proprietary (custom) |
| Output Representation | Degrees |
| Baud Rate4 | 19200, 38400, 57600, 115200, 230400 |
Electrical
| Number of Axes | 1 or 2 |
| Supply Voltage (VDC) | +10 to +30 |
| Input Current (mA, maximum) | Transmitting: DXI-100 32 mA & DXI-200 50 mA Not Transmitting: DXI-100 22 mA & DXI-200 40 mA |
Environmental
| Operating Temperature Range | -40°C to +85°C |
| Storage Temperature Range | -40°C to +85°C |
| Protection Class per IEC 529 | IP67 |
| NEMA Enclosure Rating | 6 |
| Shock | 1500g, 1 msec, ½ sine |
| Vibration Survival (grms, 20Hz to 2KHz) | 20 |
Enclosure
| Material | Anodized and Alodine Aluminum |
| Seal | MILD-STD-202 Method 112 |
| Connector Type | MS27476Y10D35P |
| Recommended Mating Connector | MS27473T10B35S |
Notes:
1: Full range is defined as “from negative full input angle to positive full input angle”
2: Non-linearity is specified as deviation of output referenced to a best fit straight line, independent of misalignment.
3: In default condition without averaging enabled.
4: Default Baud Rate is 38400
| D750-100/200 Datasheet |
| Outline Drawing |
The Jewell LCF-300 Series flexure suspension servo fluid damped inclinometer is a ±1° to ±90° device designed for applications where high levels of shock and vibration are present. LCF-300 units are characterized by excellent turn on repeatability and very low hysteresis. It is available in three different versions (D, L, or S), varying input and output, and with either a 6 pin connector or a pin-terminal option in order to meet your specific needs.
The 750-150 tiltmeter is a high-performance, single-axis tilt sensor with the same specifications as the 750-100, but housed in a larger, more ruggedized, with an IP66 enclosure. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as excellent output stability. Units are available with a 6-pin connector, pin-terminals, or a wired connection option. Available outputs include 0-5V and 4-20mA. Custom input ranges, filters, and temperature compensation are also available on request.
The JMA-100/200/300 series is available in single (JMA-100), dual (JMA-200), and triple (JMA-300) axis configurations. This presents a robust and rugged design for industrial use, but with the benefit of low-cost MEMS technology.
The Jewell SMA Series accelerometer is a low cost, high precision sensor designed with very high accuracy. Applications include robotics, construction equipment, industrial measurement and control, and precision machining. All Emerald Series accelerometers are RoHS compliant.
The LSLR is a very rugged, ultra-low, single-axis accelerometer designed for peak performance in extreme conditions. The fluid damped mechanism delivers superior noise rejection in high shock and vibration environments as well as excellent output stability. Units are available with a 6-pin connector, pin-terminals, or flying leads. Available outputs include ±5V, 0-5V, and 4-20mA. Custom input ranges, filters, and temperature sensor are also available on request.
