$250.00

The DIN-150 bridge input modules contain an isolated 15-bit analog to digital converter and measures resistive bridge or load cell sensors. Each module is hardware optimized to measure either 3mV/V or 10mV/V sensors and includes a DC excitation output voltage source of either +5V or +10Vdc. The excitation voltage output can source up to 50mA to the sensor.

The DIN-150 performs all signal conditioning, the analog to digital conversion and produces a linearized temperature output. The values are scaled in 16-bit unsigned integer format that represents a percentage of the full scale input range. The data values are transmitted to a host computer using the Modbus RTU serial protocol via an RS-485 serial port.

Download Datasheet

Download Manual

Download Modbus Register Map

Modbus Scaling Overview

The DIN-150 module easily mounts on industry standard 35mm DIN-rail.

*Input Range

Excitation

Clear

Compare

SKU: N/A Categories: Analog Input Modules, DIN-100, DIN-100, DIN-100 Modbus Analog Input Modules, Modbus Modules Tags: analog input, bridge, bridge input module, data acquisition, DIN mount, DIN rail, DIN-150, DIN-151, DIN-152, DIN-153, DIN-154, load cell, load cell input module, Modbus RTU, RS-485

Additional information

Additional information

Power	• Regulated +5Vdc, 0.75W max. • Protected against power supply reversals
Features	• Ranges: +/-30mV, +/-100mV. • Accuracy: +/-0.05% of F.S. max. • Resolution: 10uV (mV spans), 0.02% of F.S. on V span. • Common mode rejection: 100db at 50/60 Hz. • Excitation: 5V, 10V, 50mA max • Input burnout protection to 30Vdc. • Offset Control: Full input range. • Zero drift: +/-1uV/deg C max. • Span tempco: +/-50ppm/deg C max.
Software	The DIN-150 series remote I/O modules are compatible with all commercial software programs and OPC servers that support the Modbus RTU protocol. Commercials software programs from DreamReport, Wonderware, National Instruments Labview, Indusoft, DAQFactory and DASYLab all support the Modbus RTU protocol. OPC Servers from Kepware and MatrikonOPC support the Modbus RTU protocol.

DIN-150 Modbus Bridge Input Modules

Additional information

You may also like…

Power Supplies

Cables – 9 Pin-F to Tin Lead

BP-8 Mounting Backplanes

Power Supplies

USB-COMi

DASYLab Data Acquisition Software

Related Products

Model 802 Deep Water Submersible Tiltmeter Series

Model MD908 ‘IRIS’ Tilt Switch

ECS eCompass Series

IRIS-SC Digital Signal Conditioning Card

Model D701 Platform Tiltmeter

D1000 Analog Input and Digital I/O Modules

D1100 Voltage Input Modules

D1400 RTD Input Modules

D1500 Bridge Input Modules

D1600 Frequency Input Modules

H1750 Digital I/O Board

DIN-110 Modbus Voltage Input Modules